Rubrik: Proceedings - ETG-Fachberichte
ETG-Fb. 156: CIPS 2018
größer

Energietechnische Gesellschaft im VDE (ETG) (Hrsg.)

ETG-Fb. 156: CIPS 2018

10th International Conference on Integrated Power Electronics Systems, Proceedings March, 20 – 22, 2018, Stuttgart/Germany

ETG-Fachberichte

2018, 622 Seiten, 140 x 124 mm, Slimlinebox, CD-Rom
ISBN 978-3-8007-4540-1
Persönliche VDE-Mitglieder erhalten auf diesen Titel 10% Rabatt

Inhaltsverzeichnis Vorwort

In the next decades, power electronic system development will be driven by energy saving systems, intelligent energy management, power quality, system miniaturization and high reliability. Monolithic and hybrid system integration will include advanced device concepts including wide bandgap devices, new packaging technologies and the overall integration of actuators/drives (mechatronic integration).

CIPS is consequently focused on the following main aspects:
- assembly and interconnect technology for power electronic devices and converters
- integration of hybrid systems and mechatronic systems with high power density
- systems‘ and components‘ operational behavior and reliability

Basic technologies for integrated power electronic systems as well as upcoming new important applications will be presented in interdisciplinary invited papers.
In 2018 the successful story of CIPS will continue as the conference focus is today more important than ever - increasing functionality, energy efficiency and system reliability while decreasing cost.

We are pleased to welcome all engineers coming from industry and academia engaged in power electronics-related
- system development
- component development
- reliability engineering
- research
to share their research and technical achievements joining CIPS 2018.
ETG – Energietechnische Gesellschaft im VDE (ETG)
Die ETG bündelt im VDE die Fachkompetenz der Elektrischen Energietechnik von der Erzeugung, Übertragung, Verteilung bis hin zu den vielfältigen Anwendungsfeldern in Fachbereichen und Fachausschüssen. Ungefähr 300 Experten aus Industrie, Forschung, Versorgungsunternehmen, Hochschulen und Behörden sind dort ehrenamtlich tätig und bilden damit die technisch-wissenschaftliche Basis für die Aktivitäten der ETG.
Zur erweiterten Tagungsbeitragssuche
1

Integration solutions for clean and safe switching of high speed devices

Autoren: Schanen, Jean-Luc; Jeannin, Pierre-Olivier
2

Review of Parasitic Minimization Techniques for High Frequency Power Conversion

Autoren: Reusch, David; Lidow, Alex
3

A Fully-Isolated Robust Common-Mode Hybrid Filter

Autoren: Mollov,  Stefan
4

Electromagnetic noise induced by novel high voltage fast switching device

Autoren: Funaki, Tsuyoshi
5

The Promise of GaN in Light of Future Requirements for Power Electronics

Autoren: Deboy, Gerald; Kasper, Matthias; Garcia, Alfredo Medina; Schlenk, Manfred
6

Frequency Optimum of Semiconductor Technologies and State-of-the-Art Magnetic Components on SMPS

Autoren: Reimann, Tobias; Scherf, Marko
7

Test Strategies in Industrial Companies

Autoren: Rimestad, Lars
8

Automotive Qualification Routines for Power Electronics Components in Electrified Powertrains

Autoren: Rittner, Martin; Thoben, Markus; Kriegel, Kai
9

Condition and Health Monitoring in Power Electronics

Autoren: Mollov, Stefan; Blaabjerg, Frede
10

Analytics for Power Electronic Components - Methods to figure out root causes of failures

Autoren: Petzold, Matthias; Klengel, Sandy; Boettge, Bianca; Tismer, Sebastian; Patzig, Christian; Brand, Sebastian; Altmann, Frank
11

Limitation of Power Module Lifetime Derived from Active Power Cycling Tests

Autoren: Scheuermann, Uwe; Junghaenel, Marion
12

Optimizing integrated Common- and Differential-Mode chokes with the PermeabilityLink-method

Autoren: Schliewe, Joern; Koeppen, Matthias; Gauss, August; Lange, Detlef; Weber, Stefan
13

Thermistor Die for Power Module Applications

Autoren: Schuurman, Sophie; Mattens, Erik; Beneden, Bruno Van; Mattiuzzo, Emilio; Turnaturi, Marcello
14

Benchmark of the gate driver supplies' architectures for "N" power devices in series connection

Autoren: Nguyen, Van-Sang; Lefranc, Pierre; Crebier, Jean-Christophe
15

SMPS electromagnetic noise in System-on-Chip: Resonant frequency and amplitude dependencies

Autoren: Feltrin, Eric; Chesneau, David; Vollaire, Christian
16

C-V Characterization Technique for Four-Terminal GaN-on-Si HEMTs Based on 3-Port S-Parameter Measurements

Autoren: Salcinesa, Cristino; Moench, Stefan; Spudic, Boris; Kallfass, Ingmar
17

Ferrite embedding for Power SiPs – a packaging view

Autoren: Thomas, Tina; Schneider-Ramelow, Martin; Hoffmann, Stefan; Becker, Karl-Friedrich; Walter, Hans; Bader, Volker; Braun, Tanja; Hoene, Eckart
18

Power Loss Analysis of 60 V Trench Field-Plate MOSFETs Utilizing Structure Based Capacitance Model for Automotive Application

Autoren: Kobayashi, Kenya; Sudo, Masaki; Omura, Ichiro
19

A SiC MOSFET Power ModuleWith Integrated Gate Drive for 2.5 MHz Class E Resonant Converters

Autoren: Jorgensena, Asger Bjorn; Nairb, Unnikrishnan Raveendran; Munk-Nielsena, Stig; Uhrenfeldt, Christian
20

Pressureless sintering of large dies by infrared radiation

Autoren: Schmitt, Wolfgang; Chew, Ly May; Miller, Robert
21

Simulation of the Thermal Transient Behaviour of Silicon Carbide Modules Using Liquid Convection Cooling

Autoren: Mueter, Ulf; Radvan, Jens; Richter, Stefan; Hoffmann, Klaus F.
22

Vias in DBC Substrates for Embedded Power Modules

Autoren: Bach, Hoang Linh; Yu, Zechun; Letz, Sebastian; Bayer, Christoph Friedrich; Waltrich, Uwe; Schletz, Andreas; Maerz, Martin
23

Fabrication of PCB Embedded 1200V/50A Power Module and Benchmarking with Commercial DBC-based Package

Autoren: Sharma, Ankit Bhushan; Schnur, Johann; Haag, Niko; Kuwan, Thomas; Stogel, Armin; Huesgen, Till
24

Dielectric Properties and Partial Discharge Inception Voltage of Aluminum Nitride Insulating Substrate at High Temperatures

Autoren: Abe, Tsuyoshi; Suenaga, Michiya; Akihiro Imakiire; Kozako, Masahiro; Hikita, Masayuki; Shiota, Hiroki; Nishimura, Takashi; Muto, Hirotaka
25

Electrochemical Corrosion on Ceramic Substrates for Power Electronics – Causes, Phenomenological Description, and Outlook

Autoren: Bayer, Christoph Friedrich; Diepgen, Antonia; Filippi, Thomas; Fuchs, Carmen; Wuestefeld, Sophie; Kellner, Simon; Waltrich, Uwe; Schletz, Andreas
26

On the reliability of stacked metallized ceramic substrates under thermal cycling

Autoren: Mouawad, Bassem; Li, Jianfeng; Castellazzi, Alberto; Johnson, C. Mark
27

Thermal Characteristic Evaluation and Transient Thermal Analysis of Next-generation SiC Power Module at 250 °C

Autoren: Imakiire, Akihiro; Kozako, Masahiro; Hikta, Masayuki; Inagaki, Masakazu; Iizuka, Tomonori; Narimatsu, Hiroaki; Sato, Nobuaki; Shimizu, Koji; Ueda, Kazutoshi; Sugiura, Kazuhiko; Tsuruta, Kazuhiro; Iida, Makio; Toda, Keiji
28

Die-bonding performance of micron Ag particle paste for high power devices

Autoren: Takemasa, Tetsu; Ueshima, Minoru; Jiu, Jinting; Seino, Junko; Suganuma, Katsuaki
29

Integrated LED Driver based on 800V Si L-IGBTs

Autoren: Aliyu, Attahir Murtala; Elliott, Alwyn; Pathirana, Vasantha; Udugampola, V. Nishad; Rajaguru, Pushparajah
30

Novel Partial Discharge Location Algorithm for Next Generation Power Module using Small Loop Sensors

Autoren: Maki, Jyunya; Akinaga, Yuya; Kozako, Masahiro; Hikita, Masayuki; Nakamura, Yoko; Taniguchi, Katsumi; Ikeda, Yoshinari; Okamoto, Kenji
31

Surge Current Capability of IGBTs Used in Low Voltage DC/AC Hybrid Circuit Breaker

Autoren: Askan, Kenan; Bartonek, Michael; Sobe, Klaus
32

Direct Copper Bonding (DCB) alumina substrates with preapplied solder pads for simplified die soldering and improved manufacturing yield

Autoren: Richter, Hans-Juergen; Liu, Pan; Schaefer, Michael; Fritzsche, Sebastian; Watzal, Dieter; Fery, Christophe
33

A High Efficiency and Power Density, High Step-Up, Non-isolated DC-DC Converter Based on Multicell Approach

Autoren: Andreta, Andre G.; Lamorelle, Theo; Lembeye, Yves; Kerachev, Lyubomir; Sarrafin, Farshid; Fernando, Luiz; Villa, Lavado; Crebier, Jean Christophe
34

Comparison of thermal and reliability performance between a SiC MOSFET module with embedded decoupling capacitors and commercial Si IGBT power modules

Autoren: Yang, Li; Agyakwa, Pearl; Corfield, Martin; Johnson, Mark; Harris, Anne; Packwood, Matthew; Paciura, Krzysztof
35

Reliability Design of Dual Sided Cooled Power Semiconductor Module for Hybrid and Electric Vehicles

Autoren: Wang, Yangang; Li, Yun; Liu, Xuyu; Li, Helong; Dai, Xiaoping; Wu, Yibo; Liu, Guoyou
36

A High Performance 1200 V/120 A SiC Power Module Based On a Novel Multi-DBCs Hybrid Packaging Structure

Autoren: Li, Yuxiong; Huang, Zhizhao; Chen, Lichuan; Chen, Cai; Zou, Kaifeng; Kang, Yong; Luo, Fang; Li, Sichao
37

A Novel Double Sided Cooled Leadframe Power Module for Automotive Application based on ceramic-free Substrates

Autoren: Ngoc An, Bao; Kaestner, Peter; Meisser, Michael; Leyrer, Benjamin; Demattio, Horst; Noetzel, Dorit; Scherer, Torsten; Mail, Matthias; Kolb, Johannes; Blank, Thomas; Weber, Marc; Hannemann, Thomas
38

How asymmetric busbar design causes symmetric switching behavior of paralleled IGBT modules

Autoren: Wissen, Matthias; Domes, Daniel; Brekel, Waleri; Yilmaz, Koray
39

Effects of different working frequencies on the joint formation in copper wire bonding

Autoren: Schemmel, Reinhard; Althoff, Simon; Sextro, Walter; Unger, Andreas; Hunstig, Matthias; Broekelmann, Michael
40

Vibrational resistance investigation of an IGBT gate driver utilizing Frequency Response Analysis (FRA) and Highly Accelerated Life Test (HALT)

Autoren: Schriefer, Thomas; Hofmann, Maximilian; Maerz, Martin
41

FEM based enhancement of system lifetime by improvement of the die top connection of power electronic semiconductors

Autoren: Becker, Martin; Hinrich, Andreas; Klein, Andreas; Miric, Anton Z.; Fabian, Benjamin; Schmitt, Wolfgang; Kalajica, Marko
42

In-situ condition monitoring system to study the ageing of power semi-conductor devices in photovoltaic inverters

Autoren: Dbeiss, Mouhannad; Avenas, Yvan; Zara, Henri; Dupont, Laurent
43

Investigations on the Evolution of Dynamic Ron of GaN Power Transistors during Switching Cycles

Autoren: Elharizi, Malika; Khatir, Zoubir; Lallemand, Richard; Ousten, Jean-Pierre
44

An Investigation of Frequency Response Analysis Method for Junction Temperature Estimation of SiC Power Device

Autoren: Lu, Xiang; Chen, Cuili; Al-Greer, Maher; Pickert, Volker; Tsimenidis, Charalampos
45

Lifetime Testing Method for Ceramic Capacitors for Power Electronics Applications

Autoren: Dresel, Fabian; Tham, Nils; Erlbacher, Tobias; Schletz, Andreas
46

Analysis of Transient Thermal-Mechanical Stresses in Power Devices Using Test Chips and Optical Techniques

Autoren: Feisst, Markus; Moeller, Eike; Wilde, Juergen
47

Solder layer degradation measurement for SiC-MOSFET Modules under accelerated power cycling conditions

Autoren: Luo, Haoze; Iannuzzo, Francesco; Blaabjerg, Frede
48

A correlative approach to observing the thermomechanically driven microstructural evolution of ultrasonically bonded copper wires

Autoren: Mouawad, Bassem; Agyakwa, Pearl; Corfield, Martin; Johnson, C. Mark
49

Novel specimen design to test engineering plastics for power electronic applications

Autoren: Boettge, Bianca; Bernhardt, Rico; Klengel, Sandy; Wels, Sebastian; Claudi, Albert
50

A mitigation solution for bifurcations in a low-power 4-Switch Buck-Boost converter (4SBB)

Autoren: Malou, Amokrane; Allard, Bruno; Lin-Shi, Xuefang; Hijazi, Alaa; Le Men, Berengere
51

Identifying the Stray Elements of the Experimental Setup Used in the Semiconductor Datasheets

Autoren: Delhommais, Mylene; Schanen, Jean-Luc; Wurtz, Frederic; Avenas, Yvan; Rigaud, Cecile; Chardon, Sylvain
52

A Novel Gate Driving Approach to Balance the Transient Current of Parallel-Connected GaN-HEMTs

Autoren: Hackel, Jonathan; Ebli, Michael; Pfost, Martin
53

Impedance analysis in a co-planar power bus interconnect prototype for low inductance switching

Autoren: Lin, Xi; Li, Jianfeng; Johnson, C. Mark
54

Thermo-mechanical stress and deformation behavior of joined semiconductor devices using different die attach technologies

Autoren: Naumann, Falk; Lorenz, Georg; Bernasch, Michael; Boettge, Bianca; Ebensperger, Christina; Oehling, Stefan
55

Silver sinter paste optimized for pressure sintering under air atmosphere on precious and non-precious metal surfaces with high reliable sintered joints

Autoren: Chew, Ly May; Schmitt, Wolfgang; Nachreiner, Jens; Gunst, Stefan
56

Improvement of Power Module System Solders by Directional Solidification

Autoren: Hutzler, Aaron; Oetzel, Christoph; Friker, Emil
57

Power Chip Interconnections Based on TLP and Sintering of CTEMatched Conductors

Autoren: Feisst, Markus; Schaetzle, Philip; Wilde, Juergen
58

Additive Manufacturing of 3D-copper-metallizations on alumina by means of Selective Laser Melting for power electronic applications

Autoren: Stoll, Thomas; Kirstein, Matthias; Franke, Joerg
59

Parasitic Extraction Procedures for SiC Power Modules

Autoren: Kovacevic-Badstuebner, Ivana; Stark, Roger; Grossner, Ulrike; Guacci, Mattia; Kolar, Johann W.
60

Applying magnetoresistive current sensors in difficult operating environments

Autoren: Slatter, Rolf; Brusius, Matthias; Glenske, Claudia
61

Comparison of the Surge Current Ruggedness between the Body Diode of SiC MOSFETs and Si Diodes for IGBT

Autoren: Hofstetter, Patrick; Bakran, Mark-M.
62

Integration Concept for a Traction Inverter with 3D-Printed Embedded Cooling Technology realizing Highest Power Density

Autoren: Schnack, Jasper; Hilper, Dominik; Schuemann, Ulf; Eisele, Ronald; Osterwald, Frank; Beer, Holger; Ebel, Thomas
63

Grid-Connected Three-Phase H-Bridge Inverter with Level Doubling Network Controlled by Staircase Modulation Techniques

Autoren: Srndovic, Milan; Viatkin, Aleksandr; Grandi, Gabriele
64

Full SiC Integrated Power Converter Module with Replaceable Build-ing Blocks

Autoren: Aliyu, Attahir Murtala; Castellazzi, Alberto; Lasserrre, Philippe; Delmonte, Nicola; Cova, Paolo
65

Making Thermal Grease Obsolete: Fully Isolated Discrete Power Package with High Thermal and Electrical Performance

Autoren: Kasztelan, Christian; Basler, Thomas; Schmidt, Matthias; Pedone, Daniel; Fuergut, Edward
66

Transfer molding for power semiconductor modules

Autoren: Schuderer, Juergen; Lindstroem, Viktor; Liu, Chunlei; Mohn, Fabian
67

Thermal and thermo-mechanical design of an integrated substrate and heat sink for planar power module

Autoren: Li, Jianfeng; Lin, Xi; Dai, Jingru; Mouawad, Bassem; Johnson, Christopher Mark; Zhang, Hui; Liu, Xuejian; Huang, Zhengren
68

Design and Fabrication of PCB Embedded Power Module with Integrated Heat Exchanger for Dielectric Coolant

Autoren: Schnur, Johann; Sharma, Ankit Bhushan; Haag, Niko; Kuwan, Thomas; Stogel, Armin; Huesgen, Till
69

Signal Sweeping Technique to Decouple the Influence of Junction Temperature and Bondwire Lift-off in Condition Monitoring for Multichip IGBT Modules

Autoren: Chen, Cuili; Pickert, Volker; Tsimenidis, Charalampos; Lu, Xiang; Al-Greer, Maher; Logenthiran, Thillainathan; Ng, Chong; Jia, Chunjiang
70

Real-time condition monitoring of IGBT modules in PV inverter systems

Autoren: Choi, Ui-Min; Blaabjerg, Frede
71

Investigation of the usage of a chip integrated sensor to determine junction temperature during power cycling tests

Autoren: Kempiak, Carsten; Lindemann, Andreas; Thal, Eckhard; Idaka, Shiori
72

On-line Virtual Junction Temperature Measurement via DC Gate Current Injection

Autoren: Brandelero, Julio; Ewanchuk, Jeffrey; Mollov, Stefan
73

Current filament monitoring under unclamped inductive switching conditions on real IGBT interconnection

Autoren: Tsukuda, Masanori; Arimoto, Takaaki; Omura, Ichiro
74

Direct Pressed Die (DPD) Technology - a Novel Packaging Solution for Power Modules

Autoren: Goebl, Christian; Bellu, R.; Vennebusch, C.
75

PCB-Embedding for GaN-on-Si Power Devices and ICs

Autoren: Reiner, Richard; Weiss, Beatrix; Meder, Dirk; Waltereit, Patrick; Gerrer, Thomas; Quay, Ruediger; Vockenberger, Christian; Ambacher, Oliver
76

The M-Shunt Structure Applied to Printed Circuit Boards

Autoren: Boedeker, Christian; Adelmund, Melanie; Kaminski, Nando
77

An Investigation of the Parasitic Impedance on the DC-Link Capacitor of EV Drive Inverters

Autoren: Piepenbreier, Stefan; Kaess, Albert; Maerz, Martin
78

Volumetric Evaluation of Passive Components in Multilevel Three- Phase Active Front-End AC-DC Converters

Autoren: Schultheiss, Friedrich; Maerz, Martin
79

On-time Dependency on the Power Cycling Capability of Al Bond Wires Measured by Shear Test

Autoren: Jiang, Nan; Lutz, Josef; Kalajica, Marko
80

Power cycling reliability of time-reduced sintering for attaching SiC diodes using nanosilver film

Autoren: Dai, Jingru; Li, Jianfeng; Agyakwa, Pearl; Johnson, Christopher Mark
81

Experimentally-Validated Models of On-State Voltage for Remaining Useful Life Estimation and Design for Reliability of Power Modules

Autoren: Degrenne, Nicolas; Mollov, Stefan
82

Interpretation of Power Cycling Data derived from transient Cooling Curves

Autoren: Bayer, Martin; Hartmann, Samuel; Berg, Marianne; Moody, Robert; Paques, Gontran
83

Trends in SiC MOSFET Threshold Voltage and ON-Resistance Measurements from Thermal Cycling and Electrical Switching Stresses

Autoren: Kozak, Joseph P.; DeVoto, Douglas J.; Major, Joshua J.; Ngo, Khai D.T.
84

Double chips low side - high side configurable full gate driver circuits for high speed inverter leg

Autoren: Crebier, Jean-Christophe; Nguyen, Van-Sang; Lefranc, Pierre; Rouger, Nicolas; Grezaud, Romain; Ayel, Francois; Saboret, Xavier; Latimier, Paul-Emile
85

Characterization of ferrite core properties for FM-band filtering in automotive applications

Autoren: Boenisch, Sven; Hoffmann, Stefan; Hoene, Eckart; Schmidhuber, Michael
86

Suppression of Electromagnetic Interference using Multi-Stage Integrated Filtering with Screening and Partitioning

Autoren: Zhang, Zhe; Johnson, C. Mark
87

Improving 9-150 kHz EMI Performance of Single-Phase PFC Rectifier

Autoren: Davari, Pooya; Blaabjerg, Frede; Hoene, Eckart; Zare, Firuz
88

Advantages of Gallium Nitride over Silicon transistors in softswitched Resonant Switched Capacitor Converters

Autoren: Serrano, Diego; Toral, Victor; Vasic, Miroslav; Oliver, Jesus Angel; Alou, Pedro; Cobos, Jose A.
89

Fabrication and Characterization of a High-Power-Density, Planar 10 kV SiC MOSFET Power Module

Autoren: DiMarino, Christina; Johnson, Mark; Mouawad, Bassem; Li, Jianfeng; Skuriat, Robert; Wang, Meiyu; Tan, Yansong; Lu, G. Q.; Boroyevich, Dushan; Burgos, Rolando
90

A 3.3 kV SiC MOSFET Half-Bridge Power Module

Autoren: Mouawad, Bassem; Hussein, Abdallah; Castellazzi, Alberto
91

Towards Wafer Level 3D Power Integration

Autoren: Charbonnier, Jean; Rat, Venceslass; Carvalho, Hamilton de; Bergogne, Dominique; Siegert, Joerg; Pressel, Klaus
92

A transfer-molded high temperature SiC power module withstanding up to 250 °C

Autoren: Mitamura, Kazuhiro; Ozaki, Yui; Murakami, Yoshinori; Takahashi, Hiroki; Tanisawa, Hidekazu; Koui, Kenichi; Kato, Fumiki; Sato, Shinji; Yamaguchi, Hiroshi; Sato, Hiroshi
93

Highly Reliable Power Modules by Pressureless Sintering

Autoren: Waltrich, Uwe; Bayer, Christoph Friedrich; Zoetl, Stephanie; Tokarski, Adam; Zischler, Sigrid; Schletz, Andreas; Maerz, Martin
94

Pressureless Silver Nanopowder Sintered Bonds for Liquid Cooled IGBT Power Modules

Autoren: Kim, Namjee; Li, Rophina; Machler, Meinrad; Burgers, John; Winkler, Sooky; Ng, Wai Tung
95

Low Temperature Silver Sinter Processes on (EN)EPEAg Surfaces for High Temperature SiC Power Modules

Autoren: Blank, Thomas; Ishikawa, Dai; An, Bao Ngoc; Scherer, Torsten; Bruns, Michael; Helber, Jessica; Leyrer, Benjamin; Wurst, Helge; Meisser, Michael; Weber, Marc
96

Design of a low inductive switching cell dedicated to SiC based Current Source Inverter (CSI)

Autoren: Lefevre, Guillaume
97

Novel SiC Module Design – Optimised for Low Switching Losses, Efficient Cooling Path and Low Inductance

Autoren: Huber, Thomas; Kleimaier, Alexander
98

Switching characteristics of low inductance SiC module with integrated capacitors for aircraft applications

Autoren: Cougo, Bernardo; Sathler, Hans; Riva, Raphael
99

Benefits of new CoolSiCTM MOSFET in HybridPACKTM Drive package for electrical drive train applications.

Autoren: Jakobi, Waldemar; Uhlemann, Andre; Thoben, Markus; Schweikert, Christian; Strenger, Christian; Pai, Ajay Poonjal; Beaurenaut, Laurent; Muenzer, Mark
100

Advanced Die-attach by Metal-powder Sintering: The Science and Practice

Autoren: Lu, Guo-Quan; Wang, Meiyu; Mei, Yunhui; Li, Xin
101

10 kV SiC Power Module Packaging

Autoren: Johnson, Mark; DiMarino, Christina; Mouawad, Bassem; Li, Jianfeng; Skuriat, Robert; Wang, Meiyu; Tan, Yansong; Lu, G. Q.; Burgos, Rolando
102

Power Electronic Integration and packaging for aeronautic application in harsh environment

Autoren: Meuret, Regis; Martineau, Donatien; Youssef, Toni; Martin, Christian; Yade, Ousseynou
103

Innovative Reliable Nitride based Power Devices and Applications ‒ The EU Public Funded Project ‘InRel-NPower‘

Autoren: Rittner, Martin; Kessler, Ulrich; Naundorf, Joerg; Kriegel, Kai; Schulz, Martin; Meneghesso, Gaudenzio