Cover IEC 60079-14:2013
größer

IEC 60079-14:2013

Explosive atmospheres - Part 14: Electrical installations design, selection and erection

Ausgabedatum: 2013-11
Edition: 5.0
Sprache: EN-FR - zweisprachig englisch/französisch
Seitenzahl: 282 VDE-Artnr.: 220413

Inhaltsverzeichnis

IEC 60079-14:2013 contains the specific requirements for the design, selection, erection and initial inspection of electrical installations in, or associated with, explosive atmospheres. Where the equipment is required to meet other environmental conditions, for example, protection against ingress of water and resistance to corrosion, additional protection requirements may be necessary. The requirements of this standard apply only to the use of equipment under standard atmospheric conditions as defined in IEC 60079-0. For other conditions, additional precautions may be necessary, and the equipment should be certified for these other conditions. For example, most flammable materials and many materials which are normally regarded as non-flammable might burn vigorously under conditions of oxygen enrichment. These requirements are in addition to the requirements for installations in non-hazardous areas. This standard applies to all electrical equipment including fixed, portable, transportable and personal, and installations, permanent or temporary. No account is taken in this Standard of the toxic risks that are associated with flammable gases, liquids and dusts in concentrations that are usually very much less than the lower explosive limit. In locations where personnel may be exposed to potentially toxic concentrations of flammable material, appropriate precautions should be taken. Such precautions are outside the scope of this Standard. This fifth edition cancels and replaces the fourth edition published in 2007. This edition constitutes a technical revision. Refer to the document's Foreward for a listing of the specific revisions and additional Notes. Key words: requirements for the design, selection, erection and initial inspection of electrical installations in explosive atmospheres.
The contents of the corrigendum of January 2016, the interpretation sheet 1 of February 2017 and March 2020 have been included in this copy.

Buchtitel Format
Erstprüfung von elektrischen Anlagen
Rudnik, Siegfried

Erstprüfung von elektrischen Anlagen

Prüfungen vor Inbetriebnahme • Besichtigen • Erproben • Messen nach DIN VDE 0100-600
VDE-Schriftenreihe – Normen verständlich, Band 63

2020, 217 Seiten, Din A5, Broschur

Dieser Buchtitel ist auch als E-Book (PDF) erhältlich
Fachbuch eBook (PDF) Kombi-Fassung - Buch und E-Book
Baustellen-Fibel der Elektroinstallation
Cichowski, Rolf Rüdiger

Baustellen-Fibel der Elektroinstallation

Elektrische Anlagen und Betriebsmittel auf Baustellen; Erläuterungen zu DIN VDE 0100-410:2018-10, DIN VDE 0100-704:2018-10, DIN EN 61439-4 (VDE 0660-600-4):2013-09, DGUV-Information 203-006 sowie weiteren Normen und Unfallverhütungsvorschriften (UVV)
VDE-Schriftenreihe – Normen verständlich, Band 142

2019, 248 Seiten, Din A5, Broschur

Dieser Buchtitel ist als E-Book (PDF) erhältlich
eBook (PDF)
Kenngrößen für die Automatisierungstechnik
Cichowski, Rolf Rüdiger

Kenngrößen für die Automatisierungstechnik

Normenübersichten, Tabellen und Tipps aus den Bereichen Industrieautomation, Leittechnik, Prozessleittechnik (PLT) und der industriellen Mess-, Steuerungs- und Regelungstechnik (MSR-Technik)
VDE-Schriftenreihe – Normen verständlich, Band 101

2018, 264 Seiten, Din A5, Broschur

Dieser Buchtitel ist auch als E-Book (PDF) erhältlich
Fachbuch eBook (PDF) Kombi-Fassung - Buch und E-Book
Explosionsgeschützte Elektromotoren
Falk, Karl; Hofbauer, Karl

Explosionsgeschützte Elektromotoren

Erläuterungen zu den Normenreihen • für Explosionsschutz: DIN EN 60079 (VDE 0165 und VDE 0170/0171) DIN EN 61241 (VDE 0165) • für drehende elektrische Maschinen: DIN EN 60034 (VDE 0530) • für drehzahlveränderbare elektrische Antriebe: DIN EN 61800 (VDE 0160) • entsprechenden IEC-Normen • EU-Richtlinien (ATEX) sowie weiteren Normen, Vorschriften und Standards mit Hinweisen für die technisch-wirtschaftliche Antriebsoptimierung
VDE-Schriftenreihe – Normen verständlich, Band 64

2014, 240 Seiten, Din A5, Broschur

Dieser Buchtitel ist auch als E-Book (PDF) erhältlich
Fachbuch eBook (PDF) Kombi-Fassung - Buch und E-Book
Potentialausgleich, Fundamenterder, Korrosionsgefährdung
Schmolke, Herbert

Potentialausgleich, Fundamenterder, Korrosionsgefährdung

DIN VDE 0100, DIN 18014 und viele mehr
VDE-Schriftenreihe – Normen verständlich, Band 35

2013, 303 Seiten, Din A5, Broschur

Dieser Buchtitel ist als E-Book (PDF) erhältlich
eBook (PDF)
Projektierung von Kälteanlagen
Breidert, Hans-Joachim

Projektierung von Kälteanlagen

Berechnung, Auslegung, Beispiele

2013, XVI, 435 Seiten, 170 x 240 mm, Festeinband

Dieser Buchtitel ist als E-Book (PDF) erhältlich
eBook (PDF)