1
A new algorithm for computing optimized winding configurations with arbitrary given numbers of slots, pole pairs, strands, and layers
Autoren:
Koenigs, Mike; Bresser, Steffen; Harmel, Michael; Loehlein, Bernd
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
2
Combined numerical and analytical optimization of coil geometry in an axial flux permanent magnet energy harvester
Autoren:
Moeller, Felix; Goehler, Lutz; Hofmann, Wilfried
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
3
Determination and utilization of small electric drive systems overload potentials using the example of a contrabass clarinet
Autoren:
Kurz, Ulrike; Rais, Pauline; Theis, Dominik; Seggelke, Jochen; Gundelsweiler, Bernd
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
4
Dynamic Modeling and Simulation of the Efficiency-Optimized Operation of Squirrel-Cage Induction Machines Based on Electrical Quantities and Rated Data
Autoren:
Moos, Jason; Fraeger, Carsten
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
5
Evaluating FEMM for Torque Analysis in Induction Machines: A Complementary Tool for SMEs
Autoren:
von Lattre-Hertel, Andrea; Reinlein, Micheal; Kohlmann, Bastian; Germishuizen, Johannes
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
6
Extending The Limits of Short-Stroke High Peak Force Density Solenoids
Autoren:
Poltschak, Florian; Riquelme, Danilo
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
7
Influence of magnetic guidance on the torsional behaviour of Concentric Tube Robots
Autoren:
Mayer, Juliane; Thayaparan, Aarathy; Pott, Peter P.
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
8
Optimisation Method for an Asymmetric Rotor Design to Reduce Torque Ripple in Reluctance Synchronous Machines
Autoren:
Schmidt, Michael; Germishuizen, Johannes; Dietz, Armin; Parspour, Nejila
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
9
Rotor magnetization technologies for IPM-motors and their evaluation
Autoren:
Slatter, Rolf; Saito, Kaori
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
10
Sensorless Position Controlled Stop for a Switched Reluctance Motor
Autoren:
Schullerus, Gernot; Czerwenka, Philipp
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
11
Simple Production of Micro-Drives Using Plastic Bonded Rotor Magnets and Concentrated Stator Windings
Autoren:
Stamann, Mario; Dolgirev, Juri; Hieke, Sebastian; Leidhold, Roberto
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
12
Simplified Identification of Iron Losses in Permanent Magnet Synchronous Machines Using Flux Maps
Autoren:
Diringer, Nina; Schindler, Tobias; Schmidt, Michael; Dietz, Armin; Karamanakos, Petros
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
13
Simulation of a synchronous reluctance machine taking into account the processing influences on the electrical steel
Autoren:
Heidrich, Tobias; Moeckel, Andreas
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
14
Single Sided Axial Flux Machine with Flux Barriers
Autoren:
Bratke, Christian; Gerling, Dieter
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
15
Slotless BLDC Miniature Pump for Harsh Media: High Power Density through Integrated Thermal and Diffusion Design
Autoren:
Gschwandl, Mario; Wagner, Stefan; Zeiner, Tim
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
16
Star-point changeover for permanent-magnet synchronous motors
Autoren:
Mathis, Stefan; Huth, Gerhard
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
17
Stator and Rotor Design for Multiphase Induction Machines with Pole-Changing Capability
Autoren:
Mallinger, Stefan; Gruber, Wolfgang; Radman, Karlo
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung
18
Topology Optimization of a Magnetic Soft Actuator for Enhanced Actuation Performance
Autoren:
Zhang, Wei; Dolgirev, Juri; Liu, Xingyu; Gundelsweiler, Bernd; Urschel, Sven
Konferenz:
IKMT 2025 - 14. GMM/ETG-Fachtagung