Cover ISO/IEC 14846:2003
größer

ISO/IEC 14846:2003

Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Call Intrusion supplementary service

Ausgabedatum: 2003-03
Edition: 2.0
Sprache: EN - englisch
Seitenzahl: 64 VDE-Artnr.: 215371

ISO/IEC 14846:2003 specifies the signalling protocol for the support of the Call Intrusion supplementary service (SS-CI) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).


SS-CI is a supplementary service which, on request from the calling user, enables the calling user to establish communication with a busy called user by breaking into an established call between the called user and a third user (unwanted user).


The Q reference point is defined in ISO/IEC 11579-1.


Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 14845.


The signalling protocol for SS-CI operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.


ISO/IEC 14846:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-CI and other supplementary services and ANFs.


NOTE Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications.


ISO/IEC 14846:2003 is applicable to PINXs which can interconnect to form a PISN.