IEC 60807-8:1992

Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen

IEC 60807-7:1991

Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality

IEC 60268-11:1987/AMD2:1991

Amendment No. 2

IEC 60807-1:1991

Rectangular connectors for frequencies below 3 MHz - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications for connectors with assessed quality

IEC 60603-1:1991

Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

IEC 60268-12:1987/AMD1:1991

Amendment No. 1

IEC 60603-8:1991

Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm

IEC 60807-3:1990

Rectangular connectors for frequencies below 3 MHz. Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction

IEC 60268-11:1987/AMD1:1989

Amendment No. 1

IEC 60130-1:1988

Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.

IEC 60807-6:1988

Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types

IEC 60603-6:1987

Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double sided printed boards of 1.6 mm (0.063 in) nominal thickness

IEC 60603-5:1987

Connectors for frequencies below 3 MHz for use with printed boards. Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing

IEC 60268-12:1987

Sound system equipment. Part 12: Application of connectors for broadcast and similar use

IEC 60268-11:1987

Sound system equipment. Part 11: Application of connectors for the interconnection of sound system components

IEC 60603-4:1987

Connectors for frequencies below 3 MHz for use with printed boards. Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm (0.075 in) centres and staggered terminations at that same spacing

IEC 60603-3:1987

Connectors for frequencies below 3 MHz for use with printed boards. Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (0.100 in) centres and staggered terminations at that same spacing

IEC 60130-12:1976

Connectors for frequencies below 3 MHz. Part 12: Link and test connectors

IEC 60130-10:1971

Connectors for frequencies below 3 MHz. Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

IEC 60130-5:1966

Connectors for frequencies below 3 MHz. Part 5: Rectangular multipole connectors with blade contacts