A H-Scara Mini Robot - a Dual Parallel Kinematics Mini Manipulator

Konferenz: ISR/ROBOTIK 2010 - ISR 2010 (41st International Symposium on Robotics) and ROBOTIK 2010 (6th German Conference on Robotics)
07.06.2010 - 09.06.2010 in Munich, Germany

Tagungsband: ISR/ROBOTIK 2010

Seiten: 7Sprache: EnglischTyp: PDF

Persönliche VDE-Mitglieder erhalten auf diesen Artikel 10% Rabatt

Siltala, Niko; Vuola, Asser; Heikkilä, Riku; Tuokko, Reijo (Department of Production Engineering, Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere, Finland)

This paper represents a H-Scara mini robot and an assembly cell where it is used. The robot is targeted by size and other features to fit into the desktop and micro Factory concept developed by Tampere University of Technology (TUT-muF). The robot has four degrees of freedom. It is a combination of two parallel kinematic structures, which are connected into series. This way the moving mass has been reduced, reachability of the robot extended as far as possible and workspace kept as clear as possible from wires and other mechanical parts like motors. TUT-muF is a concept defining modular reconfigurable assembly system for desktop and micro factories. This is achieved through specifying system architecture, module dimensions, interfaces and other aspects of the concept. This way the modules can be easily and quickly integrated as functional micro manufacturing system. The presented robot is intended to be one module fitting in the concept and to demonstrate at the same time the features of the TUT-muF concept.